Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Hunters Creek Village
A chimney inspection in Hunters Creek Village typically runs $189 – $389 for a Level 1, and $289 – $589 for a Level 2 with camera scan. We dispatch background-checked, uniformed technicians to Hunters Creek Village and most inspections here are completed in under two hours. Call (325) 750-6259 to book, and you’ll get a written price before any work starts. That’s not a promise we hedge on. It’s the way Flint Chimney Co Houston has operated since 2002 as part of the Garrison Partners family.
Most Hunters Creek Village homes are large custom builds, many with multiple fireplaces and tall masonry chases. That means a chimney inspection here isn’t a quick glance up the flue. It’s a documented look at liners, caps, smoke chambers, and often the shared chase walls that run between attached structures. We know what to look for because we’ve been through these homes block by block, from Memorial Drive to the quieter cul-de-sacs off Voss Road.
Why Flint Chimney Co Houston Is Hunters Creek Village’s Preferred Chimney Inspection Company
Hunters Creek Village homeowners tend to ask the same question: is the problem actually in my chimney, or is it coming from next door? In this neighborhood, that’s not a strange question. Attached construction and shared masonry chases mean a neighbor’s gas logs or dryer vent can push flue gases into a stack you’re responsible for. Our Chimney Inspection team runs camera scans specifically to isolate each flue, so you know exactly which appliance is venting where.
We’re part of the Garrison Partners family, and we operate under The Garrison Standard: written scope, written price, and a 365-Day Done Right Promise on every repair. If a covered repair fails within one full year, we return at no charge. No argument, no invoice. That guarantee is in writing on every job we do in Hunters Creek Village, and it’s why homeowners here call us back year after year.
Styles & brands we work with
Level 2 Chimney Inspection in Hunters Creek Village
A Level 2 Chimney Inspection in Hunters Creek Village is the standard we recommend for most homes here, and it runs $289 – $589 depending on the number of flues, roof access, and whether we’re pulling a cap for the camera. The inspection includes a video scan of the entire flue interior, a check of the smoke chamber, damper, crown, cap, and the accessible portions of the chase. If you have a shared wall with a neighbor or multiple flues in one masonry chase, this is the inspection that actually tells you whether cross-contamination is happening.
Camera Scan and Cross-Flue Isolation
In Hunters Creek Village, many chimneys are built as a single masonry chase containing two or three separate flues. A crack in one flue liner lets the neighbor’s gas log exhaust bleed into your smoke chamber. A Level 2 camera scan is the only way to see that. We run the camera from the firebox up through the crown, noting cracks, gaps, spalling, and any foreign ductwork that shouldn’t be in the chase.
When a Level 2 Makes Sense
You need a Level 2 if you’re buying or selling a home in Hunters Creek Village, if you’ve had a chimney fire, if you’ve changed fuel type, or if your home has attached construction. Honestly, given the custom chases and shared walls common here, it’s the inspection we’d recommend even for an annual check. It catches what a Level 1 can’t.
Chimney Leak in Hunters Creek Village
A Chimney Leak in Hunters Creek Village usually shows up as a water stain on the ceiling near the fireplace, or a musty smell in the firebox after heavy rain. Repair work for a leaking chimney here typically runs $350 – $1,200 depending on whether it’s a cracked crown, failing flashing, or a rusted damper assembly. Houston’s humidity and those occasional hard freezes do a number on masonry crowns, and Hunters Creek Village’s older custom homes from the 1980s and 1990s are at the age where original flashing and caps are starting to fail.
Crown and Cap Repair
A cracked crown lets water run down into the chase and soak the flue liner, which accelerates corrosion and can rust a damper solid in a season or two. We repair crowns with a proper slope and overhang so water runs off instead of pooling. If the cap is the problem, we replace it with a unit sized for your specific flue configuration, not a one-size-fits-all box from a big box store.
Flashing and Chase Top Work
Flashing is the metal that seals where the chimney meets the roofline. Hunters Creek Village has its share of steep roof pitches on custom homes, and that means flashing takes a beating from wind-driven rain during Gulf storm events. We inspect, remove, and reseal flashing with proper counterflashing so water doesn’t find the gap between the masonry and the roof deck.
Trusted Brands We Service in Hunters Creek Village
When a repair is needed, we use materials from professional-grade chimney trade brands: DuraFlex for stainless steel relining, HeatShield for cast-in-place liner repair, and Olympia Chimney for caps and chase covers. We don’t stock cheap aftermarket parts. We stock what the fireplace manufacturers themselves specify, and we keep common Hunters Creek Village sizes on the truck. That means a liner repair or cap replacement here doesn’t get delayed waiting on a distributor in Houston.
Common Chimney Inspection Problems We See in Hunters Creek Village Homes
- Shared chase cross-contamination: On a street in Hunters Creek Village, our tech found a Level 2 inspection on a 1990s custom brick home where the neighbor’s gas logs were venting into the same masonry chase as the client’s wood-burning fireplace. A camera scan identified a cracked flue liner allowing flue gases into the client’s smoke chamber. We recommended a HeatShield repair to isolate the flues before the next burn season.
- Clogged custom caps and spark arrestors: The dense live oak canopy in Hunters Creek Village drops leaves and pollen onto custom caps constantly. Homeowners mistake the resulting poor draft for a dirty chimney and call for a sweep, but the real problem is a completely blocked cap. We check cap airflow on every inspection.
- Rusted dampers and corroded liners from humidity: Hunters Creek Village sits in some of the most humid air in Harris County, and inside a multi-flue chase that humidity condenses on metal components. We routinely find dampers rusted open or frozen shut, and stainless liners with pitting corrosion. Homeowners only notice when water stains appear on the ceiling near the fireplace.
- Cracked masonry from freeze-thaw cycles: The Houston area doesn’t freeze often, but when it does, brick and stone with any moisture in it can spall and crack. Hunters Creek Village homes built since the 1980s have had decades of those cycles, and we find crown and brick damage on a regular basis during annual inspections.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Hunters Creek Village, TX
A standard Level 1 chimney inspection in Hunters Creek Village runs $189 – $289. A Level 2 inspection with camera scan runs $289 – $589, and the higher end of that range is typical for homes with multiple flues or difficult roof access. A Level 3 inspection, which involves opening a portion of the chimney structure to examine hidden areas, starts around $750 and goes up based on the work required to access the problem and rebuild the area afterward. Every inspection includes a written report with photos, and we walk you through what we found. You’ll never be told to trust us on a repair recommendation without seeing the camera evidence yourself. Call (325) 750-6259 for a free estimate and a written price before any work begins.
We Also Serve Cities Near Hunters Creek Village
Flint Chimney Co Houston covers Hunters Creek Village and the surrounding communities across Harris and Fort Bend counties. Our technicians regularly serve Houston, Humble, Sugar Land, and Baytown. If you’re in one of those cities and need a Chimney Inspection in Hunters Creek Village and the broader metro area, call us and we’ll get you scheduled at the same written price standard we use everywhere.
Serving Hunters Creek Village, TX - Our Local Coverage Area
We’re a Hunters Creek Village Chimney Sweep company that knows this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Hunters Creek Village
We run a camera scan through each flue in the shared chase and look specifically for cracks in the flue liner walls, gaps in the smoke chamber, or evidence of foreign ductwork entering the chase. If we find a breach, we show you the footage and recommend a repair like HeatShield to isolate the flues before the next burn season. Call (325) 750-6259 to schedule a Level 2 inspection with camera scan.
Yes. A cap clogged with live oak leaves and pollen blocks airflow, which creates poor draft and pushes smoke back into the house. We check cap airflow on every inspection, and if the cap is undersized or the mesh is too fine for the heavy canopy in Hunters Creek Village, we’ll show you the restriction and recommend the right cap replacement. Call (325) 750-6259 and we’ll include the cap check in your annual inspection.
Because the problems in Hunters Creek Village chimneys are rarely caused by use. Humidity, freeze-thaw cycles, shared chase walls, and caps clogged with oak debris all do damage whether the fireplace is lit or not. A Level 2 camera scan catches those issues before they become leaks or cross-contamination hazards. Call (325) 750-6259 to book yours.
Yes. A camera scan in a shared chase will show any foreign ductwork that doesn’t belong to your fireplace or furnace. We can trace where each flue terminates and what appliance it’s connected to, including a neighbor’s dryer vent if it’s improperly routed into your stack. Whatever we find, you’ll see it on the video before we recommend any work. Call (325) 750-6259 for an inspection that documents exactly what’s in your chase.
In humid climates like Hunters Creek Village, creosote absorbs moisture from the air and becomes a sticky, tar-like glaze that clings to the flue walls. It doesn’t flake off in dry sheets the way it does in drier parts of Texas. That glazed, third-degree creosote is harder to remove and it burns hotter and longer if ignited. During an inspection, we identify the creosote stage and specify the correct removal method or liner treatment. Call (325) 750-6259 to schedule an inspection and find out what stage you’re dealing with.
Call Flint Chimney Co Houston for Your Hunters Creek Village Inspection
Every chimney inspection in Hunters Creek Village starts with a written price and ends with a written report you can see. No vague recommendations, no upsell pressure, no work recommended without camera evidence. We’re part of the Garrison Partners family and we operate under The Garrison Standard on every job. Led by Hank Delano, our technicians are background-checked, uniformed, and trained to work on the custom chimney systems common in Hunters Creek Village. Call (325) 750-6259 to book your inspection, and we’ll give you a straight answer and a straight price before anyone puts a ladder on your roof.
Written by Hank Delano, Owner at Flint Chimney Co Houston, serving Hunters Creek Village and the surrounding Harris County area.