Flue relining
Sweep & inspection
Caps & crowns
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Flue Liner Replacement: The Houston Owner’s Guide
An Olympia Chimney flue liner replacement in Houston typically runs $1,850 to $3,400 installed, depending on liner length, diameter, and access. We stock Olympia Chimney-compatible stainless liners on the truck and can usually complete the swap in a single visit. Most Houston homeowners discover their liner has failed during a chimney inspection or after noticing rust flakes in the firebox or a faint smoky smell that won’t clear.
The flue liner is the inner pipe that carries smoke and combustion gases up and out of your house. When it corrodes, cracks, or separates, those gases can leak into the chimney cavity or the living space. With an Olympia Chimney product, the liner is often part of a prefabricated or factory-built system, which means replacement has to match the original diameter and connector style exactly.
Which Olympia Chimney Models This Applies To
Olympia Chimney manufactures stainless steel relining systems and rigid liner components used across a range of factory-built and masonry chimney setups. The most common Olympia Chimney liner products we see in Houston homes are their rigid stainless liners in 5.5-inch, 6-inch, and 8-inch diameters, along with matching connector kits, top plates, and rain caps. Compatibility comes down to three things: the inside diameter of your existing flue, the appliance or fireplace BTU rating, and whether the liner is being used for venting a gas appliance, oil burner, or wood-burning fireplace. Get any one of those wrong and the liner either won’t draft properly or won’t fit at all.
Unlike some brands that only sell through specific distribution channels, Olympia Chimney components are widely available, which means we can source OEM parts directly or use quality aftermarket equivalents from DuraFlex, HeatShield, and Gelco where they meet the same UL listing for your application. The OEM-versus-aftermarket decision matters less than the spec match. A liner rated for gas-only use at high temperatures is not interchangeable with one built for wood-burning creosote exposure. We always match the listing to the appliance, not the price tag.
Styles & brands we work with





Signs Your Olympia Chimney Flue Liner Replacement Is Failing
- Rust flakes or metallic debris in the firebox. Stainless liners should not shed. Flaking means surface corrosion has started, usually from condensation inside the liner or water intrusion from a bad cap or crown. In Houston’s humidity, condensation is the bigger driver, especially on gas fireplaces that run for short cycles.
- A smoky smell that lingers after the fire is out. If the liner has a crack or a separated joint, smoke finds its way into the chimney chase or wall cavity instead of exiting the top. You’ll notice it most in the room directly above or behind the chimney.
- White or brown staining on the exterior chimney chase. This is efflorescence, and it means moisture is moving through the chimney system. The liner may still be intact, but if water is getting in, corrosion isn’t far behind.
- Visible gaps, buckling, or separation at liner joints. On factory-built systems, joints should be tight and mechanically fastened. If you can see daylight or feel movement at a seam, the liner has shifted or the connector has failed.
- A carbon monoxide detector that trips when the fireplace runs. This is the one symptom we treat as an emergency, not a maintenance item. A cracked liner on a gas appliance can route exhaust into the home. Shut the unit down and call us at (325) 750-6259.
Replacement Cost & What’s Included
A full Olympia Chimney flue liner replacement in Houston runs $1,850 to $2,600 for a typical single-story home with a straight vertical flue under 25 feet. Two-story homes, steep roof pitches, or flues over 35 feet push the job to $2,800 to $3,400. The price includes the liner sections, top plate, rain cap, connector, and all labor.
What drives the range is access. A straight run with an open chase is faster; a liner that has to navigate offsets or be fished through a tight chase takes more time. We give every customer a written price before work starts, and that number holds. Our repairs carry the 365-Day Done Right Promise, a written guarantee valid for one full year. If the liner fails within that period, we return at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things. Look for rust flakes in the firebox. Check the top cap with binoculars from the ground for obvious damage. Note any smell when the unit runs. That tells you if something’s wrong.
What you should not do is pull connectors apart or run a snake camera up the flue without knowing what you’re looking at. A damaged liner on a gas appliance is a carbon monoxide risk, and an improperly connected liner is a fire hazard. This is not a part where “close enough” is acceptable. If you’re anywhere near the Montrose area or the older neighborhoods inside the Loop, we’ve spent a lot of time on those roofs, and our crew knows the Houston heat and humidity will find any gap. Tell me what you’re seeing, and I’ll tell you what it costs to fix it. Call (325) 750-6259 and we’ll walk you through what we need to know before we come out.
Flint Chimney Co Houston is an independent chimney service provider. We’re not affiliated with Olympia Chimney, but we work with their components regularly and stock compatible parts.
FAQs
In Houston, a stainless flue liner typically lasts 15 to 25 years, but gas appliance liners in humid climates often fail sooner, sometimes within 10 to 12 years. Condensation from short gas-burner cycles is the main culprit, not heat. Call (325) 750-6259 for an exact assessment, and we’ll show you what the camera sees.
Small holes or pinholes can sometimes be addressed with a resurfacing product like HeatShield, but separated joints, heavy rust, or warped sections require full liner replacement. The decision should be made with camera evidence, not guesswork, and we’ll show you the footage before we quote anything.
Most single-story Houston homes with a straight flue run take 3 to 5 hours. Two-story homes or liners with offset bends can run a full day. We’ll give you a written scope and time estimate before we start.
Yes. We carry 5.5-inch, 6-inch, and 8-inch stainless liner sections, connectors, top plates, and caps, and we also stock compatible components from DuraFlex, HeatShield, and Gelco. That means most jobs are completed the same day, no ordering and no return trip. Call (325) 750-6259 and we’ll confirm the parts we need before we head out.
Get Your Liner Replaced
If your Olympia Chimney flue liner is giving you trouble, call (325) 750-6259 for a free estimate. We inspect with a camera, we show you what we find, and we put the price in writing before any tools come off the truck.
Written by Hank Delano, Owner, Flint Chimney Co Houston at Flint Chimney Co Houston, serving Houston and nearby areas.